Leather Universal Car Seat Covers Full Set

Leather Universal Car Seat Covers Full Set is designed for 5-seat passenger vehicles that need a practical interior refresh without replacing the original upholstery. The set combines leatherette panels, high-resilience sponge and a shaped backing structure to provide a stable covering surface with added cushioning.

The two-tone panel layout gives the seat surface a clean, structured appearance, while selected perforated sections improve the texture and ventilation of the seating area. The material is also suitable for routine cleaning and daily vehicle use.

The front covers use a shaped construction around the seat and headrest areas, with zippers and fastening components used to secure the cover during installation. Rear sections are divided to accommodate common split-bench layouts and maintain access to seatbelts, armrests and other original seat functions.

Red Rain supplies this full-set configuration for automotive accessory distributors, car interior shops, retailers and private-label programs. Color combinations, branding and packaging can be adjusted for different product ranges.

Design features:

3D Contoured Construction with Two-Tone Leatherette Panels

The shaped panel structure follows the main contours of the seat more closely than a flat cover, while contrasting leatherette sections create a simple two-color interior design.

Front Seat Construction:

Contoured Headrest Area

The front headrest covers use a shaped construction to reduce excess material around the headrest and create a cleaner finished appearance.

Structured Panel Stitching

Vertical and horizontal seams define the individual panels and help maintain the intended shape of the cover during installation.

Perforated Seating Sections

Selected panels feature small perforations that add surface texture and allow greater air movement through the seating material.

Side-Airbag Clearance

The front-seat construction includes reserved areas around the side-airbag position. Vehicle-specific airbag and seat configuration should be checked before installation.

Zippered Seatback

Zipper sections help close the rear portion of the front-seat covers and make positioning around different seat shapes more manageable.

Rear Seat Configuration:

Split-Bench Sections

The rear portion is divided into separate sections to accommodate common split rear-seat arrangements rather than using one continuous cover.

Seatbelt Access

Reserved openings and fastening areas allow the original seatbelt positions to remain accessible after installation.

Armrest Access

The rear configuration includes coverage around the center armrest area while retaining access for normal use.

Child Seat Use

The split-seat structure leaves practical access to the rear seating area. Child-seat installation should always follow the vehicle manufacturer's requirements and the specific seat-cover configuration.

Interior Appearance:

The two-color construction creates a defined visual break between the center and side sections of the seat. This makes the cover suitable for interiors where a simple factory-style replacement is preferred over heavily patterned designs.

The combination of smooth and perforated leatherette surfaces adds variation without changing the overall structure of the seat.

Color Options:

Red & White

Green & Black

Blue & White

Black & Grey

Additional color combinations can be developed according to customer samples, color references or private-label requirements.

Complete Product Specifications:

Key Product Features:

3D Contoured Construction

The molded and layered construction gives the front covers more defined contours around the seating and headrest areas, helping reduce loose material compared with basic flat seat covers.

Two-Tone Surface Design

Contrasting leatherette panels provide a simple visual structure that can be matched with different factory interior colors.

Layered Seating Structure

The combination of leatherette, resilient sponge, structural backing and anti-slip material provides a stable covering system with additional cushioning for everyday driving.

Full-Set Coverage

The 13-piece configuration covers the principal front and rear seating areas, including backrests, seat bases, headrests, center armrest and transition areas.

Installation:

The covers are secured using elastic straps, plastic chucks, S-shaped hooks and front-seat zippers. The installation method is intended to avoid specialized tools and does not normally require removal of the original seats.

Typical installation time is approximately 30-60 minutes, depending on the vehicle seat configuration and installation experience.

Installation Steps:

1. Remove the headrests and fit the corresponding headrest covers.

2. Position the front backrest and seat-base covers according to the seat shape.

3. Secure the straps, chucks and hooks underneath the front seats.

4. Install the rear split sections and align the openings with the vehicle's original seat functions.

5. Check the headrests, seatbelts, armrest and fastening points before use.

Full Package Contents:

2 Front Backrests

2 Front Seat Base Covers

2 Front Headrests

2 Rear Split-Bench Seat Covers

2 Rear Backrests

1 Rear Center Headrest

1 Center Armrest

1 Center Transition Pad

1 Small Bag of Installation Accessories

Total: 13 Pcs

Wholesale & Customization:

Red Rain supplies this model for automotive accessory wholesalers, distributors, car interior shops and private-label brands. Standard color combinations are available for stock programs, while custom projects can be developed from customer color references, samples or design requirements.

Custom options include color combinations, contrast stitching, pattern adjustments, logo application, private label branding and packaging.

For new projects, sample development can be arranged before bulk production to confirm material, color, stitching and overall construction.

Production & Quality:

Production capacity reaches approximately 9,000 sets per month. Manufacturing processes include computerized cutting, sewing, punching and other operations required for automotive seat-cover production.

Quality management is operated under an ISO 9001 quality system. Materials, stitching, panel alignment, fastening components and finished sets can be inspected according to the agreed product requirements.

Order Options:

Evaluation Program: 10 units minimum, single color

Stock Replenishment: 30 units minimum, mixed colors

Private Label Program: 100 units minimum, mixed colors

New product sample development: approximately 15 days, subject to project requirements

Logistics & Partner Services:

FAQ:

1. What vehicles are these Leather Universal Car Seat Covers designed for?

The set is designed for a wide range of 5-seat passenger vehicles. Because seat dimensions and rear-seat structures vary between models, fitment should be checked against the vehicle before ordering.

2. What is the material construction?

The cover uses a layered construction consisting of faux leather, high-resilience sponge, a shape-retention layer, non-woven fabric and an anti-slip base.

3. Does the set include both front and rear covers?

Yes. The complete configuration contains 13 pieces covering the main front and rear seating areas, headrests, center armrest and transition area.

4. Are the front covers designed around side airbags?

The front covers include reserved areas around the side-airbag position. Compatibility should be confirmed for the specific vehicle and seat configuration before installation.

5. Can the color combination be changed?

Yes. Red Rain can develop alternative color combinations based on customer color references, samples or private-label requirements.

6. Can a company logo be added?

Logo application is available for qualified OEM and private-label projects. Position, method and artwork requirements can be confirmed during sample development.

7. How should the surface be cleaned?

Use a damp cloth for routine cleaning and allow the material to dry naturally. Abrasive cleaners and harsh solvents should be avoided.

8. What is the MOQ?

Evaluation orders start from 10 units in a single color. Stock orders start from 30 units with mixed colors, while private-label orders generally start from 100 units.