Luxury Universal Leather Seat Covers with Head Pillow and Lumbar Support are designed for drivers who want additional seating support without replacing the original vehicle seats. The set combines faux leather upholstery, integrated head pillows, lumbar cushioning and perforated seating panels in one coordinated interior solution.
The front seat sections use a layered construction with high-resilience foam to provide additional support around the head, back and lower lumbar area. Perforated leather sections add surface ventilation, while the non-slip backing helps reduce movement during normal entry and exit.
The seat cover set also incorporates a British flag-inspired pattern into the seat surface, giving the interior a recognizable motorsport and heritage-style appearance. Unlike a simple decorative cover, the design combines styling elements with practical seating support and everyday protection.
Designed for a wide range of 5-seat passenger vehicles, the 13-piece configuration covers the front seats, rear bench, headrests and center armrest areas. Red Rain also supports custom colors, patterns, logo application and private-label production for automotive accessory distributors and brands.
The main difference between this collection and conventional universal seat covers is the integrated support structure. The front seat covers combine a shaped head pillow with a lumbar support section, helping provide additional cushioning around the areas that receive frequent contact during driving.
The high-resilience foam is positioned within the layered construction rather than simply adding a loose cushion on top of the seat. This keeps the support elements visually integrated with the seat cover and provides a cleaner finished appearance.
Integrated Head Pillow
The front seat configuration includes matching head pillows that extend the visual design of the seat cover while providing additional cushioning around the head and neck area.
Built-In Lumbar Support
A shaped lumbar section is incorporated into the front seat base and backrest structure to provide additional cushioning around the lower back area during everyday driving.
Perforated Seating Panels
Perforated faux leather sections are used on selected seating surfaces. The small perforations provide a different surface texture and allow greater air movement through the material.
British-Inspired Panel Design
The British flag-inspired pattern is integrated into the seat panels instead of being applied as a separate loose decoration. Contrast colors and stitched panel boundaries create a consistent appearance across the front seats.
Zippered Seatback Structure
Zippered sections help secure the front seat covers around the seatback and make adjustment easier during installation.
Airbag Clearance Areas
The front seat design reserves designated side-airbag areas. Because seat structures and airbag systems differ between vehicle models, compatibility should be checked for the intended vehicle before installation.
The rear section follows the same material and color concept as the front seats while using a practical split-bench configuration for common 5-seat passenger vehicles.
●Split rear-seat sections for common 60/40 configurations
●Matching color and stitching treatment
●Center armrest access
●Rear headrest coverage
●Seatbelt access maintained through reserved openings
●Compatible with common child-seat installation positions where vehicle configuration permits
The rear design is intended to provide coordinated coverage without turning the rear bench into one fixed piece. This makes the set more suitable for vehicles where the rear seats need to fold or remain accessible for passengers and cargo.
The construction combines surface appearance, cushioning and anti-slip performance into a multi-layer assembly.
| Layer | Function |
| Faux Leather Surface | Provides the finished appearance and an easy-care seating surface |
| Perforated Surface Sections | Add surface texture and support airflow |
| High-Resilience Foam | Provides cushioning for the head, back and lumbar support areas |
| Shape-Retention Layer | Helps maintain the form of the covered sections |
| Non-Woven Backing | Provides an additional structural layer |
| Anti-Slip Base | Helps reduce movement during normal vehicle use |
The standard collection is available in several contrasting color combinations:
●Pink & Blue
●Yellow & Black
●Grey & Black
●Blue & Black
For OEM and private-label projects, Red Rain can evaluate additional color combinations, contrast stitching and pattern variations according to the customer's product requirements.
| Specification | Details |
| Brand | Red Rain |
| Product | Luxury Universal Leather Seat Covers with Head Pillow and Lumbar Support |
| Fitment | Universal design for a wide range of 5-seat passenger vehicles |
| Product Type | Universal Fit Automotive Seat Cover Set |
| Material | Faux Leather + High-Resilience Foam + Shape-Retention Layer + Non-Woven Backing + Anti-Slip Base |
| Front Seat Support | Integrated Head Pillow and Lumbar Support |
| Surface | Perforated and Non-Perforated Faux Leather Panels |
| Pattern | British Flag-Inspired Design |
| Installation | Straps + Chucks + S-Shaped Hooks + Zippered Front Sections |
| Tools | No Specialized Installation Tools Normally Required |
| Functional Access | Seatbelt Openings, Headrests and Center Armrest Access |
| Performance | Wear Resistant, Stain Resistant, Water Resistant and Easy to Clean |
| Care | Clean with a Damp Cloth; Allow to Air Dry Naturally |
| Standard Colors | Pink & Blue, Yellow & Black, Grey & Black, Blue & Black |
| Set Configuration | 13-Piece Complete Set |
The complete configuration is designed to cover the main seating areas of a typical 5-seat passenger vehicle.
●2 Front Bucket Backrests with Head Pillows
●2 Front Seat Base Covers with Lumbar Support
●2 Front Headrest Covers
●2 Rear Split-Bench Seat Covers
●2 Rear Backrest Covers
●1 Rear Center Headrest Cover
●1 Center Armrest Cover
●1 Center Transition Panel
●1 Bag of Installation Accessories
Total: 13 Pcs
As an Auto Seat Protector, the cover helps reduce direct contact between the original upholstery and common sources of everyday wear, including dust, stains, friction and minor spills.
The faux leather surface can be wiped with a damp cloth for routine cleaning. This makes the set suitable for daily-use vehicles, family cars and drivers who want to refresh the interior without permanently modifying the original upholstery.
For vehicles with side airbags, seatbelt systems or other integrated seat functions, the cover must be installed according to the applicable vehicle and product instructions. Fitment and safety compatibility should be verified before use.
The cover uses a combination of straps, plastic chucks, S-shaped hooks and zippers. The system is intended to allow installation without specialized tools or removal of the vehicle seats.
●Prepare the seats: Remove the headrests and clean the original seating surface before installation.
●Install the front sections: Position the backrest and seat-base covers, then connect the fastening straps and hooks underneath the seat.
●Fit the head pillows and headrest covers: Adjust the covers so the support sections align with the original seat structure.
●Install the rear sections: Match the split rear covers with the vehicle's seat configuration and secure the fastening points.
●Check functional areas: Confirm access to seatbelts, headrests, center armrest and designated airbag areas before use.
Red Rain supplies automotive accessory distributors, wholesalers, retailers and private-label brands. Customers can start from an existing Red Rain design or provide their own product concept for evaluation.
Available customization options include:
●Custom Color Combinations
●British-Inspired or Customer-Specified Patterns
●Contrast Stitching
●Logo Application
●Private Label Branding
●Custom Packaging
●Sample Development
●OEM/ODM Production
For custom projects, material selection, dimensions, pattern placement, logo requirements and packaging specifications can be reviewed during the sampling stage before bulk production.
| Item | Details |
| Monthly Production Capacity | Up to 90,000 units |
| Quality Management | ISO 9001 Certified |
| Sample MOQ | 10 Sets, Single Color |
| Stock Order MOQ | 30 Sets, Mixed Colors |
| Private Label MOQ | 100 Sets, Mixed Colors |
| Custom Development | Approximately 15 Days, Subject to Project Requirements |
Each production batch is checked through material inspection, cutting inspection, stitching inspection, color matching and finished-set inspection. Particular attention is given to panel alignment, stitching consistency, fastening components and the overall appearance of the completed set.
Production is managed under an ISO 9001 quality management system. Inspection records and relevant product documentation can be provided for qualified B2B customers according to project requirements.
| Service | Details |
| Sample Orders | 10 Sets Minimum for Single-Color Samples |
| Stock Orders | 30 Sets Minimum with Mixed Colors |
| Private Label | 100 Sets Minimum with Mixed Colors |
| Stock Lead Time | Approximately 7-10 Business Days |
| Custom Lead Time | Approximately 35-45 Business Days |
| Shipping | Worldwide FOB Service Available |
The front seat configuration includes integrated head pillows and lumbar support sections using high-resilience foam within the seat-cover construction. These components provide additional cushioning without requiring separate loose cushions.
Yes. They are designed for a wide range of 5-seat passenger vehicles. Because seat dimensions, headrest designs and rear-seat layouts vary between vehicles, fitment should be confirmed for the target vehicle before ordering.
The covers use faux leather combined with high-resilience foam, a shape-retention layer, non-woven backing and an anti-slip base. Selected areas also use perforated material.
Yes. The standard configuration is a 13-piece set covering the front seats, rear split bench, headrests, center armrest and transition area.
Yes. Custom colors and contrast combinations are available for qualifying OEM and private-label projects. Color references can be reviewed during the sampling process.
Yes. Logo application and private-label branding can be discussed according to the required position, production method and order quantity.
For routine cleaning, wipe the faux leather surface with a damp cloth and allow it to air dry naturally. Avoid abrasive materials and harsh solvents.
Sample orders start from 10 sets in a single color. Stock orders start from 30 sets with mixed colors, while private-label orders generally start from 100 sets.
Red Rain manufactures automotive seat covers for distributors, wholesalers, retailers and private-label customers. The production process includes computerized cutting, sewing, punching, embroidery and hemming operations for different seat-cover constructions.
This product combines universal-fit coverage with integrated head and lumbar support, giving buyers a different product configuration from standard flat seat covers. Customers can order existing colorways or work with Red Rain on new colors, patterns, branding and packaging.
Contact Red Rain for samples, wholesale pricing, OEM/ODM development or private-label seat cover production.
Address
Huancheng North Road, Xinhe Town, Wenling City, Taizhou City, Zhejiang Province, China
Tel
Contact Red Rain for car seat covers and automotive interior accessories. We support customized products based on your drawings or samples.
Customization: Product development, samples, OEM production
MOQ: From 10 sets for suitable products
Products: Universal Seat Covers, Custom Fit Seat Covers, Cowhide Leather Steering Wheel Covers
Send us your product requirements, drawings or samples to discuss specifications and cooperation.
