Custom Fit for Tesla Model 3 Seat Cover

Custom Fit for Tesla Model 3 Seat Cover is developed for Tesla Model 3 vehicles from 2017 to 2023. The cover is patterned according to the corresponding seat dimensions and structure, with separate sections for the front seats, rear backrests, rear bench, headrest and armrest areas.

The cover uses a 5-layer construction consisting of Nappa leather, high-density sponge, support layer, non-woven fabric and an anti-slip base. The layered structure provides surface protection while maintaining cushioning and helping the cover stay positioned on the original seat.

Cutouts and openings are reserved for the front side airbag areas, seat belt buckles and other original seat functions. The installation structure is designed to work with the existing seat without removing the seat itself. Installation should follow the supplied instructions to keep the functional openings correctly positioned.

Red Rain develops automotive interior products for overseas customers and supports OEM and ODM production based on drawings, physical samples, specified materials, colors and packaging requirements.

Technical Specifications：

Fit and Construction Details:

Model-Specific Pattern

The cover is developed for the seat configuration of the 2017–2023 Tesla Model 3 rather than using a universal seat-cover pattern. Individual sections follow the shape of the front seats, rear bench and backrests to reduce excess material around the seat surfaces.

5-Layer Material Structure

The Nappa leather surface is combined with a high-density sponge, support layer, non-woven fabric and anti-slip base. Each layer serves a different function, including surface protection, cushioning, structural support and positioning on the original seat.

Functional Openings

The cover includes reserved areas for the front side airbags and openings around the seat belt and other seat-related components. During installation, these areas should remain in their intended positions and should not be covered or obstructed.

Full Seat Set

The set covers the main front and rear seating surfaces together with the corresponding headrest, armrest and rear side sections. The complete configuration contains 12 pieces.

Material and Protection:

The Nappa leather surface is designed for regular automotive interior use. Its water-resistant and stain-resistant properties make routine cleaning easier when exposed to dust, drinks, food residue or other common interior contaminants.

The high-density sponge layer provides cushioning between the surface material and the original seat, while the anti-slip backing helps reduce movement after the cover has been properly installed.

For maintenance, loose dirt can be removed with a soft cloth. If liquid is spilled, it should be wiped away promptly rather than left on the surface for an extended period.

Compatible Tesla Model 3 Years:

This seat cover is developed for:

2017 Tesla Model 3

2018 Tesla Model 3

2019 Tesla Model 3

2020 Tesla Model 3

2021 Tesla Model 3

2022 Tesla Model 3

2023 Tesla Model 3

Before ordering, customers should confirm the vehicle year and seat configuration to ensure the correct version is supplied.

Color Options:

• Black & White

• Red & Black

• White

• Red

• Black

Material Testing and Certifications:

The company's supplied product and material documentation includes CE and BSCI-related certification information. Certification scope should be confirmed against the specific product, material and order requirements before procurement.

Red Rain Product Development and Manufacturing:

Taizhou Hongyu Trading Co., Ltd. operates the Red Rain brand and has been engaged in automotive interior products since 2017. Its product range includes universal seat covers, custom fit seat covers, cowhide leather steering wheel covers and other vehicle interior accessories.

For custom projects, Red Rain can work from customer drawings, physical samples or specified product requirements. The development process includes requirement communication, pattern or sample development, sample confirmation and production according to the approved specifications.

The production equipment includes computer-controlled automatic cutting machines, pattern-processing equipment, variable-frequency embroidery machines, high-frequency punching machines, high-speed sewing machines and hemming machines. These processes cover material cutting, surface processing, sewing and final assembly.

The company's overseas business is mainly concentrated in North America and the UK, with approximately 90% of sales going to North America and 10% to the UK. Red Rain also accepts small-batch trial orders for applicable products.

OEM / ODM Services: Drawings, physical samples, material specifications, colors, logo embossing and private-label packaging

MOQ: From 10 sets for applicable trial orders; OEM quantities depend on customization requirements

Main Markets: North America and the UK

Installation:

Installation Method

The seat cover uses elastic straps, metal S-hooks and plastic installation tools. No drilling is required, and the original seats do not need to be removed for normal installation.

Typical installation time: Approximately 1–2 hours, depending on vehicle condition and installer experience.

Installation Steps

1. Raise the headrests and install the corresponding headrest covers.

2. Position the front seat covers according to the seat contours and secure the lower sections beneath the seat.

3. Install the rear backrest and bench sections, then secure the straps and hooks while keeping the seat-folding areas accessible.

4. Check the side-airbag areas, seat belt buckles and other functional openings before completing the installation.

Package Contents:

2 x Front Bucket Seat Covers

2 x Front Seat Bases

1 x Front Armrest

2 x Rear Backrests

2 x Rear Side Wing Protectors

1 x Rear Long Bench

1 x Rear Middle Headrest

1 x Rear Armrest

Total: 12 PCS

1 Bag of Plastic Installation Tools & Hooks

FAQ

1. Which Tesla Model 3 years is this seat cover designed for?

This version is developed for Tesla Model 3 vehicles from 2017 through 2023. Customers should confirm the exact vehicle year and seat configuration before ordering.

2. Is this a universal seat cover?

No. The pattern is developed around the corresponding Tesla Model 3 seat structure rather than using a general universal-fit design. This helps provide more consistent coverage around the front and rear seating areas.

3. Does the seat cover accommodate the original side airbags?

The front-seat pattern includes designated areas around the original side-airbag locations. Correct installation is required to keep these areas unobstructed and maintain the intended function of the vehicle's safety components.

4. Can the seat cover be used with heated or ventilated seats?

Compatibility depends on the specific Tesla Model 3 seat configuration and selected cover construction. Customers should confirm the applicable seat functions and material requirements before ordering.

5. How is the seat cover installed?

The set uses elastic straps, metal S-hooks and supplied plastic installation tools. Permanent modification to the vehicle is generally not required, and installation typically takes about 1–2 hours depending on the vehicle configuration and installer experience.

6. How should the Nappa-style leather seat cover be cleaned?

Use a soft damp cloth to remove routine dust and surface dirt. When additional cleaning is required, use a care product suitable for the selected material and follow the material manufacturer's instructions. Allow the surface to dry naturally.

7. Can Red Rain customize the seat cover for different requirements?

Yes. Red Rain supports OEM and ODM projects with customization options for materials, colors, stitching, logos, component configuration and packaging. Samples can be developed and approved before bulk production.

8. What is the MOQ for this product?

Applicable trial orders can start from 10 sets. The MOQ for customized OEM production depends on the selected materials, colors, packaging and other project specifications.

9. What does Custom Fit for Tesla Model 3 Seat Cover mean?

It means the cover pattern is developed around the applicable Tesla Model 3 seat configuration instead of using a generic universal pattern. Vehicle year, seat functions and interior configuration should be confirmed before production to ensure the appropriate pattern is selected.

About Red Rain - China Automotive Seat Cover Manufacturer:

Taizhou Hongyu Trading Co., Ltd., operating under the Red Rain brand, is a China-based automotive interior product supplier established in 2017. The company develops and supplies universal seat covers, custom fit seat covers, cowhide leather steering wheel covers and related vehicle interior accessories.

Red Rain's production operations cover computerized cutting, pattern processing, embroidery, high-frequency punching, sewing, hemming and assembly. The company uses different equipment for individual production stages and can coordinate product development with subsequent bulk manufacturing.

The company mainly serves overseas customers, with approximately 90% of its business in North America and 10% in the UK. Products can be developed from customer drawings or physical samples, with requirements reviewed before sampling and production.

Established: 2017

Product Categories: Car Seat Covers, Custom Fit Seat Covers, Steering Wheel Covers and Automotive Interior Accessories

OEM / ODM: Supported

Main Export Markets: North America and the UK

Shipping and Order Information: