Custom Fit for Tesla Model Y Juniper Seat Cover

Red Rain develops this Custom Fit for Tesla Model Y Juniper seat cover for the 2025 and 2026 Tesla Model Y Juniper. It is not designed for the 2026 Standard RWD/AWD version. The cover is patterned according to the corresponding original seat structure to provide coverage around the front and rear seats, headrests, armrests, and other specified areas.

The seat cover uses Nappa leather with a multi-layer construction consisting of the outer leather layer, high-density sponge, support layer, non-woven fabric, and anti-slip base. The surface is designed for routine protection against water, stains, dust, pet contact, and daily wear, while the underlying layers provide cushioning and help keep the cover in position.

The front seat covers include reserved areas around the side airbag locations. The cover configuration also allows access to the original seat belt buckles, seat heating function, and rear armrest. Installation should follow the supplied instructions to keep the designated functional areas clear.

Red Rain manufactures automotive interior products for overseas customers, including custom seat covers, universal seat covers, steering wheel covers, and related accessories. The company accepts OEM and ODM projects based on confirmed vehicle information, drawings, samples, materials, colors, logos, and packaging requirements.

Technical Specifications：

Vehicle Compatibility:

This seat cover is developed for the following Tesla Model Y Juniper versions:

Tesla Model Y Juniper 2025

Tesla Model Y Juniper 2026

The product is not designed for the 2026 Tesla Model Y Standard RWD/AWD version. Customers should confirm the vehicle version before ordering because differences in seat configuration can affect fit.

Custom Fit Design:

The cover pattern is developed around the corresponding Tesla Model Y Juniper seat structure rather than using a universal seat-cover pattern. Separate sections are provided for the front seats, rear backrests, rear bench, headrests, and armrests.

The shaped panels follow the main seat contours and are secured with elastic straps and hooks. The installation structure is intended to reduce unwanted movement of the cover during normal vehicle use.

The front seat pattern includes designated openings and stitching around the side airbag areas, while the seat belt buckle and other required functional areas remain accessible after installation.

Material & Construction:

The seat cover uses a five-layer construction:

1. Nappa Leather: The outer layer provides the visible surface and can be wiped for routine cleaning.

2. High-Density Sponge: The cushioning layer adds padding between the cover and the original upholstery.

3. Support Layer: Provides structural support within the cover construction.

4. Non-woven Fabric: Forms an internal layer between the structural and surface materials.

5. Anti-slip Base: The bottom layer helps reduce movement between the cover and the original seat surface.

The material construction is intended for regular vehicle use and provides an additional layer between the original upholstery and common sources of stains, moisture, dust, pet hair, and surface wear.

Seat Function Compatibility:

Side Airbag Area

The front seat covers include reserved stitching and openings around the designated side airbag locations. Installation should be completed according to the supplied instructions without covering or obstructing these areas.

Seat Heating

The product is designed for vehicles with the original seat heating function. The material configuration allows the heating function to remain accessible through the installed cover.

Seat Belt Buckles

The cover layout leaves the original seat belt buckle areas accessible for normal use.

Rear Armrest

The rear-seat cover configuration allows the original rear armrest to be opened and used after installation.

Rear Seat Function

The rear cover sections are secured with straps and hooks while allowing the corresponding rear seat sections to remain usable.

Protection for Original Seats:

The seat cover adds a removable protective layer over the original upholstery. The outer surface is intended to help reduce exposure to:

• Water and liquid spills

• Food and beverage stains

• Dust and daily dirt

• Pet hair and scratches

• Friction from regular use

• General surface wear

For routine maintenance, surface dust and light dirt can be removed with a soft damp cloth. Cleaning methods should be selected according to the actual material and manufacturer recommendations.

Color Collection:

• Black & White

• White

• Gray

Installation & Compatibility:

Installation is completed using the supplied elastic straps, metal S-hooks, and plastic installation tools. No drilling or permanent modification of the original seats is required.

Installation time: approximately 1–2 hours

Tools and fastening parts: Plastic Installation Tools + Elastic Straps + Metal S-Hooks

Installation sequence:

1. Raise the headrests and install the corresponding headrest covers.

2. Position the front seat covers and secure the lower fastening points beneath the seat.

3. Install the rear backrest covers and secure the fastening straps.

4. Position the rear bench cover and connect the required hooks and straps.

5. Check the seat belt buckles, side airbag areas, armrest, and other functional openings before use.

What's in the Box:

2 x Front Bucket Seat Covers

2 x Front Seat Bases

1 x Front Armrest

2 x Rear Backrests

1 x Rear Long Bench

3 x Rear Headrests

1 x Rear Armrest

Total: 12 PCS

1 Bag of Plastic Installation Tools & Hooks

Quality & Compliance:

Red Rain's supplied company information includes CE and BSCI-related compliance documentation. Certification scope should be confirmed according to the specific product, material, and order requirements before purchase.

For OEM projects, customers can request the applicable documentation and product requirements to be reviewed during the sampling and order-confirmation stage.

Transformation:

[STANDARD SEAT vs. SEAT COVER INSTALLATION]

OEM & ODM Manufacturing:

Red Rain accepts customized automotive seat cover projects based on customer requirements. Customers can provide vehicle information, drawings, physical samples, material specifications, colors, logos, and packaging requirements for product evaluation.

The general development process includes requirement confirmation, drawing or sample review, pattern development, sample production, sample confirmation, bulk production, finished-product inspection, and shipment.

OEM and ODM services can include:

• Custom product development

• Customer-specified materials

• Color customization

• Logo embossing

• Private-label packaging

• Bulk production

About Red Rain - China OEM Seat Cover Supplier:

Taizhou Hongyu Trading Co., Ltd., operating under the Red Rain brand, is a China-based automotive interior product supplier established in 2017. The company's product range includes universal seat covers, custom fit seat covers, cowhide leather steering wheel covers, and other vehicle interior accessories.

The company provides product development, production, sales, and service for overseas customers. Its production equipment includes computer-controlled automatic cutting machines, high-temperature pattern machines, variable-frequency embroidery machines, high-frequency punching machines, high-speed sewing machines, hemming machines, and related assembly equipment.

The production process covers material preparation, cutting, pattern processing, sewing, hemming, assembly, and finished-product inspection. This production setup supports standard products as well as customized automotive interior projects.

The company's products are mainly supplied to overseas markets, with approximately 90% of its business in North America and 10% in the UK.

FAQ:

1. Which Tesla Model Y versions does this seat cover fit?

This product is developed for the 2025 and 2026 Tesla Model Y Juniper. It is not designed for the 2026 Standard RWD/AWD version.

2. How can I confirm whether my vehicle is compatible?

Please confirm the model year and vehicle version before ordering. If the vehicle is a 2026 Standard RWD/AWD Model Y, this product should not be selected.

3. Does the cover work with the original heated seats?

The cover is designed for vehicles equipped with the original seat heating function. Actual performance can depend on the vehicle configuration, material construction, and correct installation.

4. How are the side airbags accommodated?

The front seat covers have reserved areas around the side airbag locations. These areas should remain unobstructed during installation and use.

5. Does the seat cover affect the rear armrest?

The rear cover configuration provides access to the original rear armrest so it can be opened and used after installation.

6. Can Red Rain develop a custom seat cover from a sample or drawing?

Yes. Red Rain can evaluate customer drawings, physical samples, material requirements, colors, logos, packaging, and other confirmed specifications for OEM and ODM development.

7. Can I order samples before a larger production order?

Yes. Applicable products can be supplied in small trial quantities so customers can evaluate fit, material, construction, and other product requirements before larger orders.

8. What is the MOQ and lead time?

For applicable stock or trial orders, the current minimum quantity can start from 10 sets. Stock orders are generally listed at 7–10 days, while OEM production is approximately 35–45 days, depending on the confirmed specifications and production schedule.

9. What information is required for an OEM order?

Customers can provide the vehicle model and version, drawings or samples, material requirements, colors, logo requirements, packaging specifications, and target order quantity. The final specifications and production schedule are confirmed before mass production.

Shipping & After-sales: