Tundra Car Seat Cover is a vehicle-specific 14-piece seat cover set for 2014–2021 Toyota Tundra CrewMax models. It covers the front and rear seats, headrests and front center control area, providing an additional removable layer over the original upholstery against routine wear, dust, dirt, stains and daily passenger use.
Red Rain is a China-based Toyota Tundra seat cover manufacturer supplying automotive accessory distributors, wholesalers, importers and private-label brands. The standard version uses Nappa-style faux leather with five-layer composite construction, while material, color, stitching, logo, component configuration and packaging can be customized for OEM and aftermarket programs.
Before sampling or bulk production, buyers can confirm the exact model year, CrewMax configuration, trim, seat functions and required openings. This fitment-first process helps match the approved cover pattern to the intended vehicle configuration.
Installing a vehicle-specific seat cover adds a removable protective layer over the original Tundra upholstery while updating the interior appearance. The comparison below shows the seating surface before and after installation and illustrates the practical coverage provided by the 14-piece set.
| Before Installation | After Installation |
| Original upholstery is directly exposed to daily passenger use | A removable cover adds another surface between users and the factory upholstery |
| Dust, dirt and everyday contact reach the factory seat surface | Routine surface dirt can be addressed on the removable cover |
| High-contact seating areas receive repeated wear | Covered areas receive an additional protective layer |
| Pet hair and light stains can accumulate on the upholstery | The removable cover can be cleaned separately |
| Factory seat appearance remains unchanged | Material, color and stitching options can refresh the interior appearance |
The 14-piece Tundra seat cover set is arranged around the front and rear seating areas, headrests and center control area. Once installed, the cover creates a separate surface over the original upholstery while following the applicable vehicle-specific pattern.
●More coverage: Dedicated cover components are provided for the front and rear seating areas.
●Additional protection: The cover helps reduce direct exposure of the original upholstery to dust, stains, pet hair and routine passenger use.
●Easier maintenance: The removable cover surface can be cleaned without treating the original seat upholstery directly.
●Interior refresh: Different materials, colors and stitching options allow the interior appearance to be changed without replacing the factory seats.
●Vehicle-specific installation: The cover components are developed around the applicable Tundra CrewMax seat configuration.
| Brand | Red Rain |
| Product Type | Vehicle-specific seat cover set |
| Vehicle | Toyota Tundra CrewMax |
| Model Years | 2014–2021 |
| Applicable Trims | SR, SR5, Limited, Platinum, 1794 Edition and TRD Pro |
| Standard Set | 14 pieces |
| Outer Material | Nappa-style faux leather |
| Construction | Five-layer composite construction |
| Standard Colors | Black & Gray, Brown |
| Installation | Elastic straps, metal S-hooks and plastic installation aids |
| Front Coverage | Backrests, seat bases, headrests and center control pad |
| Rear Coverage | Backrests, bench sections and headrests |
| Customization | Material, color, stitching, logo, component configuration and packaging |
This seat cover program is developed for 2014–2021 Toyota Tundra CrewMax applications. The vehicle year, cab configuration and seat layout should be confirmed before sampling because different seat functions or interior arrangements may require corresponding changes to the cover pattern.
| Model Year | Application |
| 2014 | Tundra CrewMax |
| 2015 | Tundra CrewMax |
| 2016 | Tundra CrewMax |
| 2017 | Tundra CrewMax |
| 2018 | Tundra CrewMax |
| 2019 | Tundra CrewMax |
| 2020 | Tundra CrewMax |
| 2021 | Tundra CrewMax |
The listed trim applications include SR, SR5, Limited, Platinum, 1794 Edition and TRD Pro. For wholesale and OEM orders, buyers should provide the exact model year, trim and seat configuration so the applicable pattern can be confirmed before production.
For a vehicle-specific seat cover, fitment involves more than overall seat dimensions. Headrests, seat controls, rear-seat sections, armrests, seat belts and other factory components can affect cut lines, openings and component arrangement. Confirming these details before production helps reduce fitment issues during installation.
Before ordering or requesting a sample, buyers should confirm the following vehicle details. This information helps Red Rain identify the appropriate pattern and component configuration.
●Model year: 2014–2021
●Cab configuration: CrewMax
●Trim level
●Front seat configuration
●Seat-mounted airbag locations
●Heated or power seat functions
●Rear seat and headrest configuration
●Rear armrest and cup-holder arrangement
●Required material, color and stitching
Toyota Tundra trucks are commonly used for commuting, family transportation, work, outdoor activities and frequent passenger use. These conditions can expose the original upholstery to repeated contact, dust, dirt and other everyday contamination. The seat cover provides an additional removable surface for these situations.
| Common Protection Need | How the Seat Cover Helps |
| Daily commuting and passenger wear | Adds a removable protective layer over frequently used seating areas |
| Dust and dirt | Provides a separate surface that can be cleaned as part of routine maintenance |
| Food and drink spills | Creates an additional barrier over the original seat surface |
| Pet hair and outdoor dirt | Helps reduce direct contact between contaminants and the factory upholstery |
| Frequent use of high-contact areas | Adds another surface between passengers and the original upholstery |
| Interior appearance needs updating | Allows material, color and stitching changes without replacing the factory seats |
The actual resistance to water, abrasion, staining and UV exposure depends on the selected material and final specification. These properties should therefore be confirmed against the material specification for the final order.
The standard set contains 14 individual components for the front and rear seating areas. Separating the cover by seat section allows the components to be installed and checked individually while maintaining access to the applicable seat functions.
| Component | Quantity |
| Front Backrest Covers | 2 |
| Front Seat Base Covers | 2 |
| Front Headrest Covers | 2 |
| Front Center Control Pad | 1 |
| Rear Backrest Covers | 2 |
| Rear Bench Covers | 2 |
| Rear Headrest Covers | 3 |
| Total | 14 PCS |
The standard version uses a Nappa-style faux-leather exterior combined with four backing layers. The layered construction provides the cover with its surface finish, cushioning, structural support and anti-slip properties.
| Layer | Function |
| Nappa-Style Faux Leather | Visible exterior surface and primary contact layer |
| High-Density Sponge | Adds cushioning within the cover structure |
| Support Layer | Helps maintain the shape of the cover |
| Non-Woven Fabric | Intermediate backing layer |
| Anti-Slip Base | Helps reduce movement against the original upholstery |
For OEM programs, material thickness, backing construction and surface finish can be specified during sample development. Changes in material thickness or flexibility may require corresponding pattern adjustments.
Red Rain can develop different outer materials according to the target market, product positioning and usage requirements. The standard version uses Nappa-style faux leather.
| Material | Typical Positioning |
| Nappa-Style Faux Leather | Automotive appearance and easy routine cleaning |
| Neoprene | Flexible applications and outdoor-oriented products |
| Fabric / Polyester | Textile-style products and value-oriented programs |
| Suede-Style Material | Soft-touch and interior-focused product lines |
Material selection can be based on target market, retail positioning, expected usage and required product specifications. For OEM projects, Red Rain can confirm material thickness, backing construction, surface finish and other requirements during sample development.
Black & Gray and Brown are available as standard options. Custom colors and stitching can be developed for private-label and OEM programs.
| Option | Specification |
| Black & Gray | Standard two-tone option |
| Brown | Standard alternative |
| Custom Color | Available for OEM and private-label projects |
| Stitching | Standard or contrast stitching |
The rear-seat design can accommodate the center armrest and cup-holder area. The applicable opening or concealed closure allows the rear armrest and cup holders to remain accessible when the approved pattern includes this feature.
The exact opening dimensions and closure construction should be confirmed against the vehicle pattern before production, particularly for OEM orders using different seat configurations.
Before production, buyers should confirm the seat functions and interior components that affect the cover pattern. This is especially important when supplying multiple trims or configurations.
| Item | Information to Confirm |
| Side Airbags | Seat-mounted airbag location and applicable cover construction |
| Heated Seats | Heating configuration and selected cover material |
| Power Seat Controls | Control location and required clearance |
| Headrests | Quantity, shape and adjustment arrangement |
| Rear Armrest | Folding and access requirements |
| Seat Belts | Clearance around belt buckles and belt paths |
| Rear Seat Movement | Required folding and adjustment functions |
For vehicles equipped with seat-mounted airbags, the cover must use the approved airbag-compatible pattern and construction. Buyers should not cut, sew, alter or otherwise modify the finished cover around an airbag deployment area. Final compatibility should be verified against the vehicle configuration and approved product specification before installation.
Heated-seat compatibility depends on the vehicle configuration, cover construction and selected material. Buyers should confirm the applicable requirements during sample development before bulk production.
The standard installation system uses elastic straps, metal S-hooks and supplied plastic installation aids. The covers are installed over the original seats without drilling or permanent modification to the vehicle.
A complete installation generally takes approximately 1–2 hours, depending on the vehicle configuration and installer experience.
●Raise or remove the applicable headrests and install the matching headrest covers.
●Position the front backrest and seat-base covers on the corresponding seats.
●Align seams, openings and edges with the original seat components.
●Route the straps underneath the seat and secure them with the supplied hooks and installation aids.
●Install the rear backrest and bench sections according to the approved pattern.
●Install the rear headrest covers.
●Check seat belts, headrests, seat controls, armrest access and rear-seat functions before use.
For the standard Nappa-style faux-leather version, routine cleaning can normally be completed while the covers remain installed. A soft damp microfiber cloth is suitable for removing dust and light surface dirt.
●Use a soft microfiber cloth for routine cleaning.
●Use a mild cleaner suitable for the selected material when necessary.
●Avoid bleach, abrasive cleaners and strong solvents.
●Allow the surface to dry naturally after cleaning.
●Follow the material supplier's care instructions for neoprene, fabric or suede-style versions.
Red Rain supports OEM and private-label programs for distributors, wholesalers, importers and automotive accessory brands. Buyers can customize the material, color, stitching, logo, component configuration and packaging based on the approved Toyota Tundra CrewMax pattern.
| Customization | Available Options |
| Vehicle Application | 2014–2021 Toyota Tundra CrewMax |
| Material | Nappa-style faux leather, neoprene, fabric/polyester, suede-style materials |
| Color | Standard or custom colors |
| Stitching | Standard or contrast stitching |
| Logo | Embossing or other approved branding methods |
| Component Configuration | Adjusted according to the approved vehicle pattern |
| Packaging | Standard or private-label packaging |
| Stage | Main Work |
| 1. Vehicle Confirmation | Confirm model year, CrewMax configuration, trim and seat functions |
| 2. Pattern Confirmation | Match the vehicle configuration to the applicable seat-cover pattern |
| 3. Specification Confirmation | Confirm material, color, stitching, logo and packaging |
| 4. Sample Development | Produce a sample for fitment and component checking |
| 5. Sample Approval | Confirm fit, appearance, openings and selected specifications |
| 6. Bulk Production | Cutting, sewing, assembly and finishing according to the approved sample |
| 7. Final Inspection | Check appearance, stitching, component quantity and packaging |
Production inspection covers material preparation, cutting, sewing, component assembly and finished-product checking. For customized orders, the approved sample and confirmed specification can be used as the reference for bulk production.
Red Rain can provide applicable company-level quality and social-compliance documentation for qualified projects. Product-specific material test reports and market-related documentation should be confirmed according to the final material, construction and destination market.
●ISO 9001 quality management system documentation
●BSCI social compliance documentation where applicable
●California Prop 65-related documentation where applicable
Material-specific test reports according to project requirements
Providing the following information allows Red Rain to confirm the appropriate pattern, component configuration and production requirements before sampling.
| Item | Required Information |
| Model Year | Exact Tundra model year from 2014–2021 |
| Cab Configuration | CrewMax |
| Trim | SR, SR5, Limited, Platinum, 1794 Edition or TRD Pro |
| Seat Configuration | Front and rear seat layout |
| Seat Functions | Heated seats, power adjustment and other applicable functions |
| Material | Required outer material and construction |
| Color / Stitching | Standard or custom specification |
| Branding | Logo and private-label packaging requirements |
| Quantity | Sample, trial or bulk quantity |
| Item | Specification |
| Trial Order | From 10 sets for applicable projects |
| OEM MOQ | 100 sets |
| Stock Lead Time | Approximately 7–10 days |
| OEM Lead Time | Approximately 35–45 days, depending on specifications |
| Packaging | Standard or private-label packaging |
| Shipping | FOB and other shipping terms available |
| Installation Guide | English PDF, video or printed instructions |
Red Rain is a China-based automotive interior manufacturer supplying vehicle-specific seat covers and related interior products to overseas aftermarket and OEM customers.
The company supports vehicle pattern development, sample production, material selection, color and stitching customization, logo application, private-label packaging and bulk manufacturing.
For buyers sourcing Toyota Tundra seat covers from China, Red Rain can provide a vehicle-specific 2014–2021 CrewMax seat-cover program with confirmed component configuration, material options and OEM/private-label support.
This product is developed for 2014–2021 Toyota Tundra CrewMax models. Buyers should confirm the exact model year, trim, seat layout and applicable seat functions before production to ensure the correct pattern is selected.
Not necessarily. Differences in seat functions, headrests, rear-seat configurations, armrests and other interior components may require different pattern details. The vehicle configuration should be confirmed before sampling.
The standard set contains 14 pieces, including front backrest covers, front seat-base covers, front headrest covers, one front center control pad, rear backrest covers, rear bench covers and three rear headrest covers.
Yes. The standard version uses Nappa-style faux leather. OEM and private-label projects can be customized with approved materials, colors, stitching styles, logo applications and packaging according to the target market and product requirements.
Compatibility depends on the specific vehicle configuration, seat functions, cover pattern and selected material. Heated seats, power controls and required clearances should be reviewed during sample development before bulk production.
The cover should use the approved pattern and construction for vehicles equipped with seat-mounted airbags. Buyers should confirm the airbag location before production and should not cut or modify the finished cover around an airbag deployment area.
Yes. Samples or trial quantities can be arranged for applicable projects. Buyers can use the sample to evaluate vehicle fitment, material, appearance, stitching, component configuration and installation before proceeding with bulk production.
The standard OEM MOQ is 100 sets, with an estimated production lead time of approximately 35–45 days depending on material selection, customization and order specifications. Trial orders may be available from 10 sets for applicable projects.
Provide the Tundra model year, CrewMax configuration, trim, seat functions, preferred material, color, branding requirements and estimated quantity. Red Rain can then confirm the applicable pattern, 14-piece configuration, sample requirements, MOQ and production lead time.
Address
Huancheng North Road, Xinhe Town, Wenling City, Taizhou City, Zhejiang Province, China
Tel
Contact Red Rain for car seat covers and automotive interior accessories. We support customized products based on your drawings or samples.
Customization: Product development, samples, OEM production
MOQ: From 10 sets for suitable products
Products: Universal Seat Covers, Custom Fit Seat Covers, Cowhide Leather Steering Wheel Covers
Send us your product requirements, drawings or samples to discuss specifications and cooperation.
